JHS Wanderer

THEY’VE ARRIVED

A Morning Glory, a NOTAKLÖN and the best features you’ve ever seen, in one compact enclosure.

• The first pedal in their new vertical two-in-one format with top-mounted jacks and power.

• Individual input and output jacks for each circuit — put anything between them, or give each side its own loop on a switcher.  Expansive configuration flexibility.

• Red Remote jack for each circuit. Four separate gain stages, instantly accessible for live and studio use in one pedal.

CONTROLS

LEFT SIDE — NOTAKLÖN

Volume — Controls the output volume. Counterclockwise is less, clockwise is more.

Gain — Controls the amount of overdrive. Fully counterclockwise is clean, allowing up to +16dB of clean boost in conjunction with the Volume control. Fully clockwise is maximum overdrive. As the control is turned clockwise, the mid frequencies also increase.

Treble — Controls the amount of treble boost or cut. Noon is neutral.

+/- Toggle — “Shamrock Mod.” Increases the overall gain by +4 dB, increases midrange, and engages an additional stage of hard clipping.

RIGHT SIDE — MORNING GLORY V4

Volume — Controls the output volume. Counterclockwise is less, clockwise is more.

Drive — Controls the amount of drive or gain. As the Drive is increased, it also adds brightness. Counterclockwise is less, clockwise is more.

Tone — Controls the amount of brightness. Clockwise is brighter, counterclockwise is darker.

Gain Toggle — Engages high gain mode when flipped up. The LED will turn red to indicate high gain mode is active.

Bright Cut Switch — Inset switch on the right side of the pedal that cuts the highest frequencies if the overall tone is too bright.

Order Toggle — The center toggle allows you to select which effect comes first in the signal chain for different tones when stacking both sides. The toggle points toward whichever effect is first in the chain. The Order toggle has no effect when using the individual FX jacks.

JACKS

Main Input / Output — Use the far right input and far left output when using the Wanderer as a standard two-in-one pedal.

Individual FX Jacks — The individual input and output jacks allow you to separate the two effects for use with an effects loop switcher or other external routing.

Red Remote Gain (Morning Glory) — 1/4″ jack on the upper left side of the pedal. Connect a Red Remote to remotely switch the Morning Glory Gain toggle.

Red Remote +/- (NOTAKLÖN) — 1/4″ jack on the lower left side of the pedal. Connect a Red Remote to remotely switch the +/- toggle.

SPECIFICATIONS

• Silent Soft-Touch Switching, Buffered Bypass

• Individual input and output jacks for each circuit

• Red Remote jack for each circuit

• Top-mounted jacks

• 9VDC Center Negative, 165mA